Personalize and protect your device.
- You will receive three wraps for each sensor in the starter kit. (Two contact sensor skins and one motion sensor skin)
- Made only from premium graphic vinyl, 2.5 mils thick!
Step 1: (Most important step!) Thoroughly clean the entire area to be wrapped. You do not want dust or dirt particles leaving bumps or bubbles underneath.
Step 2: We recommend cleaning and install it indoors in a controlled environment.
Step 3: Peel the backing paper from the wrap and position the material centered over the device.
Step 4: Press down on the front of the wrap first then smooth the sides down moving towards the back of the sensor. If you get a wrinkle then simply pull the area up and smooth it back down again.