Personalize and protect your device.
- You will receive two pieces for the top and bottom surfaces of the device.
- Made only from premium graphic vinyl, 2.5 mils thick!
- Wood grain films are not guaranteed to match your existing wood stains. With the vast selection of woods and stains, these reflect the most common colors of trims.
Instructions:
Step 1: (Most important step!) Thoroughly clean the entire area to be wrapped. You do not want dust or dirt particles leaving bumps or bubbles underneath.
Step 2: Peel the backing paper from the wrap and position the material centered on the device. Be sure to align with the internal led. (If the kit came with a transparent top transfer layer, then use this to align and then remove after applying the wrap)
Step 4: Press firmly with your thumbs on the top center of the wrap, smoothing your way out. If you get a wrinkle then simply pull the area up and smooth it back down again.