fits Ring Stick Up cams Gen 3 2020 model
Personalize and protect your device.
- You will receive four pieces for the body and top of the camera.
- Made only from premium graphic vinyl, 2.5 mils thick!
Instructions:
Step 1: (Most important step!) Thoroughly clean the entire area to be wrapped. You do not want dust or dirt particles leaving bumps or bubbles underneath.
Step 2: We recommend cleaning and install it indoors in a controlled environment.
Step 3: Peel the backing paper from the wrap and position the material centered over the device's front camera area.
Step 4: Press down on the front of the wrap first then smooth the sides down moving towards the rear of the cam. If you get a wrinkle then simply pull the area up and smooth it back down again. Then apply the bottom pieces and the top.