Personalize and protect your device.
- You will receive one piece for the front of the doorbell camera that extends over the sides.
- Made only from premium graphic vinyl, 2.5 mils thick!
Step 1: (Most important step!) Thoroughly clean the entire area to be wrapped. You do not want dust or dirt particles leaving bumps or bubbles underneath.
Step 2: We recommend removing the face plate from the camera. You can then clean and install it indoors in a controlled environment.
Step 3: Peel the backing paper from the wrap and position the material centered on the device. Carefully align the top portion with the inside cutout OR you can peel the wrap up and reverse it sticky side up and then align the face plate over the wrap. (If the kit came with a transparent top transfer layer, then use this to align and then remove after applying the wrap)
Step 4: Press firmly with your thumbs on the center of the wrap, smoothing your way out. If you get a wrinkle then simply pull the area up and smooth it back down again.